User guide

1. Insert the handle, Part “C”, into head, Part “A”, and fasten.

2. Align holes in one brace, Part “B”, with holes in the other brace

and start fasteners.

Then align the remaining brace slots to the head and fast

en.

Snug up br

aces clamping on to the handle, but DO NOT

OVER

TIGHTEN.

GREAT RAKE II / LAKE RAKE

ASSEMBLY INSTRUCTIONS

P.O. Box 1674 Warsaw, Indiana 46581-1674

844-SEYMOUR 574-267-8508 FAX

www.seymourmidwest.com

PK90570

Short bolts

Long bolts

DO NOT OVER-

TIGHTEN

(Clamps should not touch.)

PAGE 1
GREAT RAKE II / LAKE RAKE ASSEMBLY INSTRUCTIONS 1. Insert the handle, Part “C”, into head, Part “A”, and fasten. 2. Align holes in one brace, Part “B”, with holes in the other brace and start fasteners. 3. Then align the remaining brace slots to the head and fasten. Snug up braces clamping on to the handle, but DO NOT OVER TIGHTEN. Long bolts DO NOT OVERTIGHTEN (Clamps should not touch.) Short bolts P.O. Box 1674 Warsaw, Indiana 46581-1674 844-SEYMOUR 574-267-8508 FAX www.seymourmidwest.