Users Manual

SGW101X Series
@2019 | SG Wireless Limited
Confidential Proprietary
Website : www.sgwireless.com
12
9. Certifications
A. Qualified Antenna Type
The SGW1011 and SGW1011A module supporting an external antenna have been designed to operate with a standard 3
dBi dipole antenna. Any antenna of a different type or with a gain higher than 3 dBi is strictly prohibited for use with
this device. Using an antenna of a different type or gain more than 3 dBi will require additional testing for FCC, CE and IC.
The required antenna impedance is 50 Ω.
Manufacturer
Part Number
Max. Gain
Antenna Type
Size
Master Wireless
JZC-RPF-N-ZBG19
1/4 wave Dipole
1/4 wave Dipole
Length: 196mm
B. Bluetooth
The SGW101X series are pre-qualified as a Low Energy RF-PHY tested component, having Declaration ID of D046088 and
QDID of TBD. This allows customers to use different SoftDevices that have been qualified by Nordic without the need
to complete additional RF-PHY testing.
To achieve Bluetooth End Product qualification, the SG Wireless RF-PHY QDID can be combined with Nordic QDIDs for
the SoftDevice used when filing on the Bluetooth SIG website. The only testing required is for the Bluetooth profiles
supported by the customer’s product. Products with only custom profiles do not require any additional testing.