Technical information
Table Of Contents
- GoMobile Cover
- SGC – The SSB People
- Go Mobile at 500 Watts
- T a b l e o f C o n t e n t s
- I n t r o d u c t i o n
- C h a p t e r 1 C h a n g e s i n M o b i l e R a d i o
- C h a p t e r 2 O r i e n t i n g Y o u r s e l f t o 5 0 0 W a t t s
- C h a p t e r 3 DCP o w e r S u p p l y S y s t e m f o r a M o b i l e I n s t a l l a t i o n
- C h a p t e r 4 A n t e n n a s a n d G r o u n d s
- C h a p t e r 5 N o i s e S u p p r e s s i o n a n d S h o c k -M o u n t i n g
- C h a p t e r 6 I n s t a l l a t i o n P r o c e d u r e s
- C h a p t e r 7 I n s t a l l a t i o n V a r i a b l e s
- C h a p t e r 8 G o i n g M o b i l e a t 1 5 0 W a t t s
- Appendix A — QMS S y s t e m
- A p p e n d i x B — S e l e c t i o n o f E q u i p m e n t
- A p p e n d i x C — T e s t D a t a
- It all Adds Up
affixed), so adjust the arm position to compensate for this
droop.
Now, go get an assistant to help you: an additional set of
hands will prove invaluable in positioning and pressing the
mount into place. Use the flat palm of one hand to press the
suction cup against the window and flatten it as much as
possible. Having your assistant hold the mount in place while
you concentrate on pressing the cups flat makes things easi-
er. You can use a long object to lever additional force on the
mount (be careful not to mar the dashboard surface in doing
this).
If you do not want to have the Powertalk head rest directly
on the dash, as with the speaker, you can apply rubber feet
or Velcro to cushion the unit and protect the dash finish.
Install the Powertalk head on to the mount, position it, and
slowly tighten all hexagonal set-screws and winged knobs so
the control head is positioned as desired.
Installing PowerTalk Speaker. The external speaker can
be mounted using a variety of methods, depending on the
desired installation and available space. The speaker
includes a mounting bracket for under-dash or overhead
installation but requires drilling two holes for the sheet
metal screw fasteners.
An alternate method is to use the suction-cup adjustable
mounting arm (Catalog No. 04-14) which attaches to the
inside of the window (taking care not to block your visibility
of the road). If the speaker will rest on the dash surface,
place a small strip of Velcro™ or adhesive backed foam tape
to the speaker corners to prevent the head from marring the
dash surface from vibration while driving.
Connect the audio cable between the rear panel of the speak-36
SGC Inc. SGC Building, 13737 S.E. 26th St. Bellevue, WA. 98005 USA
P.O.Box 3526, 98009 Fax: 425-746-6384 or 746-7173 Tel: 425- 746-6310 or 1-800-259 7331
E-mail: SGCMKTG@aol.com Website: http://www.sgcworld.com
© 1997 SGC Inc.