Technical information

sions of the rear deck or trunk of the vehicle. This platform
permits disconnecting and moving the system in and out of
the vehicle when necessary (although the added weight of
the battery requires two people to lift). In addition, it leaves
the original carpet or deck of the vehicle unblemished from
screw or bolt penetrations.
Upholster the platform to match the interior of the car. We
used a heavy-duty staple gun and a hot-glue gun for attach-
ing the upholstery. Check in automotive stores for a roll of
carpet you prefer.
Drill two holes in the “L” bend of the supplied steel hooks
(SGC installation kit, Catalog No. 52-97). Mount them verti-
cally on the plywood using self-tapping wood screws, and
double as tie down points for the battery, transceiver, and
amplifier. Make sure the screws do not protrude from the
bottom of the platform, where they could cut your vehicle’s
carpet (or you).
Figure 17 — Construct a board, using hooks and
straps to secure equipment in the rear compartment
53
© 1997 SGC Inc.
SGC Inc. SGC Building, 13737 S.E. 26th St. Bellevue, WA. 98005 USA
P.O.Box 3526, 98009 Fax: 425-746-6384 or 746-7173 Tel: 425- 746-6310 or 1-800-259 7331
E-mail: SGCMKTG@aol.com Website: http://www.sgcworld.com