Technical information

ment, next to the brake vacuum booster assembly. The rub-
ber boot of this existing feedthrough was enlarged to accom-
modate the battery cable, and routed through to the passen-
ger compartment.
Driver’s compartment. Plastic moldings were affixed in
place with plugs, and were removed by popping them out.
Exterior. The QMS box was mounted on the rear left win-
dow, with mounting straps running vertically from the wheel
well to the top deck. The control cable and braided ground
strap were fed through a narrow slit where the metal body
and molded quarter panel are joined. The control cable
entered the rear deck through the modified plate cover
described below.
A convenient feed-through point for the QMS cable and
ground strap was found in the interior compartment of the
Cherokee. Located on the left rear panel at the bottom is a
pop-out plastic access plate for a fuse block. Below this is a
metal plate that can be removed, allowing cables and the
Figure 22 — The 500-watt installation fits neatly into
the Cherokee rear compartment
61
© 1997 SGC Inc.
SGC Inc. SGC Building, 13737 S.E. 26th St. Bellevue, WA. 98005 USA
P.O.Box 3526, 98009 Fax: 425-746-6384 or 746-7173 Tel: 425- 746-6310 or 1-800-259 7331
E-mail: SGCMKTG@aol.com Website: http://www.sgcworld.com