Technical information

QMS System
Introduction
SGC’s QMS (Quick Mount System) represents high reliability
backed by over 25 years of communications experience.
Unpacking QMS
We recommend unpacking the QMS antenna system and
inspecting the contents. This is necessary to ensure that no
damage has occurred due to shipping and that all items are
accounted for as verified from the packing list as follows:
One QMS Manual
One Warranty Card
One QMS Black Anodized Assembly complete with four
straps (each two feet long)
Note: If the QMS is purchased in a package configuration
(QMS-2 or QMS-3), please refer to the SG-235 and SG-303
manuals for their respective packing lists of the items sup-
plied.
QMS Installation Instructions
The QMS (Quick Mount System) antenna and coupler system
can be mounted in virtually any location convenient to the
user. Some consideration may be given, however, to the
items listed below:
Installation Considerations. Consider the following five
principles.
1. Locate the QMS system as far from the engine as
possible. This should reduce interference generated by
the engine, spark plug noise, etc. from getting into the
antenna system.
2. If possible, mounting your QMS in an area clear of
A-1
© 1997 SGC Inc.
SGC Inc. SGC Building, 13737 S.E. 26th St. Bellevue, WA. 98005 USA
P.O.Box 3526, 98009 Fax: 425-746-6384 or 746-7173 Tel: 425- 746-6310 or 1-800-259 7331
E-mail: SGCMKTG@aol.com Website: http://www.sgcworld.com
Appendix A