User manual

Mailing: PO Box 3526, Bellevue, WA. 98009
Shipping: 13737 SE 26
th
St. Bellevue, WA. 98005
Toll Free: 800-259-7331 * Phone: [phone] * Fax: [phone]
www.sgcworld.com * Email: [e-mail]
63
NO - In this position, the coupler will not use previously saved
tuning data. Each time a different frequency is selected, the coupler
will proceed through a complete tuning sequence. Clearly, the
advantage of
Yes
is speed. The coupler will seem to be matched
instantly when in this position, if the frequency being used has
previously been saved in EEPROM. Disadvantages include a
difference in frequency too small for the computer to detect. This
would result in recall of valid data that may not necessarily present
the best match. We suggest starting with JP3 in the Yes position.
If operation is as expected, don’t change it.
Mailing: PO Box 3526, Bellevue, WA. 98009
Shipping: 13737 SE 26
th
St. Bellevue, WA. 98005
Toll Free: 800-259-7331 * Phone: [phone] * Fax: [phone]
www.sgcworld.com * Email: [e-mail]
64
5.1.10 Internal B.I.T.E.* LEDs
*Built In Test Equipment
FRONT OF MAC-200
FWD
PHZ
2:1
L’Z’
TND
TND
This LED will light when the tuner has found an acceptable match.
It will remain lit until conditions have changed which will cause
the tuner to find a different match. (i.e. A new transmit frequency
has been detected, or tuner has been reset.)
L’Z’