User manual

Mailing: PO Box 3526, Bellevue, WA. 98009
Shipping: 13737 SE 26
th
St. Bellevue, WA. 98005
Toll Free: 800-259-7331 * Phone: [phone] * Fax: [phone]
www.sgcworld.com * Email: [e-mail]
13
The MAC-200 has a miniature power input jack on the back panel.
Any voltage from 10 to 18.5 VDC is suitable for operation of the
MAC-200. Average current draw will be approximately 230
milliamps. The MAC-200 should be powered from the same power
supply used to supply your transceiver to ensure that it is energized
whenever the transceiver is in operation.
12 VDC
Connection
RF Input
Chassis
Ground
Mailing: PO Box 3526, Bellevue, WA. 98009
Shipping: 13737 SE 26
th
St. Bellevue, WA. 98005
Toll Free: 800-259-7331 * Phone: [phone] * Fax: [phone]
www.sgcworld.com * Email: [e-mail]
14
3.2.2 RF Input from your transceiver
A standard SO-239 jack is for RF Input from your transceiver.
3.2.3 Chassis Ground
The chassis ground should be connected to a suitable station safety
grounding system.