Specifications

PO Box 3526, Bellevue, WA. 98009 13737 SE 26
th
St. Bellevue, WA. 98005
Toll Free: 800-259-7331 * Phone: [phone] * Fax: [phone]
www.sgcworld.com * Email: [e-mail]
© 2003 SGC Inc. 12
3.2.4.2 Long Wire Connections
The long wire connection starts from two lugs on the back panel
labeled ‘Longwire.’ They correspond to antenna selection switch 2
on the front panel. An RF ground connects to the lug labeled RF
GND. When using a single wire ‘counterpoise, it should be 5-10%
longer than the random length long wire.
IMPORTANT NOTE: A long wire connected at the back will be
radiating from the moment is leaves the MAC-200. This can lead
to excessive RF levels within the radio room at even modest power
levels. The length of wire within the radio room needs to be kept to
a minimum.
3.2.4.3 Balanced Feed Connections
Long Wire (unbalanced)
RF Hot Connection
Long Wire (unbalanced)
RF Ground Connection