Specifications

PO Box 3526, Bellevue, WA. 98009 13737 SE 26
th
St. Bellevue, WA. 98005
Toll Free: 800-259-7331 * Phone: [phone] * Fax: [phone]
www.sgcworld.com * Email: [e-mail]
. 31 © 2003 SGC Inc
4.2 Selecting the Meter Range
The meter range selection is made on the two push button switches
to the left of the meters. Press the switch labeled 20W to activate a
20 watt range. Press the switch labeled 200W to activate the 200
watt range. No harm will come to the meters if the wrong range is
activated for the power applied. When a given range is selected, a
small LED will light above the switch to indicate which range is
currently selected.
NOTE: SGC does not guarantee 100% calibration of the front
panel meters. If an accurate indication of power or SWR is desired,
an external meter should be used to develop an instrument
calibration table for the front panel meters.
4.3 Selecting the operating antenna
To select an antenna, push the numbered antenna switch on the
front panel. A small LED above the switch lights to indicate that it
is selected. The selections are:
Meter Range
Selection