Specifications

PO Box 3526, Bellevue, WA. 98009 13737 SE 26
th
St. Bellevue, WA. 98005
Toll Free: 800-259-7331 * Phone: [phone] * Fax: [phone]
www.sgcworld.com * Email: [e-mail]
. 55 © 2003 SGC Inc
the best match. We suggest starting with JP3 in the
Yes
position.
If operation is as expected, don’t change it.
5.1.10 Internal B.I.T.E.* LEDs
*Built In Test Equipment
FRONT
FWD
PHZ
2:1
L’Z’
TND
TND
This LED will light when the tuner has found an acceptable match.
It will remain lit until conditions have changed which will cause
the tuner to find a different match. (i.e. A new transmit frequency
has been detected, or tuner has been reset.)
L’Z’
This LED shows the status of the antenna impedance. When lit, the
impedance is 50 ohms or less. When off, the impedance is greater
than 50 ohms.