User`s manual

SG-211 User’s Manual

Home made vertical

antennas are commonly

made in one of two

ways. A very common

type of construction

builds the radial system

at the base of the

antenna. Flagpole

antennas are normally

built in this way. Coax

line can be run from the SG-211 to the base of the

antenna. The center lead of the coax will feed the

radiating element in the flagpole vertical while the coax

shield will be connected to the RF grounding system.

Another way that a vertical can be fed is to have it fed

with a wire directly from the SG-211 right-most RF hot

terminal to the radiating element.

To the Radiating

Element