Technical information

05-42 SG-2020 Mobile, Base and Pedestal Mount Plate . $19.95
Mount plate is to be attached at the lower part of the radio to secure
as a base, mobile or pedestal mount for both base and mobile installa-
tion. Includes four adhesive rubber feet and two, 5 inch Velcro strips
for alternate use. Pedestal hardware is not supplied
05-43 SG-2020 Front Flip-foot stand $2.95
Flip-foot stand to elevate radio 2 inches; for desk or bench operation.
05-97 SG-2020 Warranty (3 years extended warranty) $139.95
Premium Warranty: Extended 3 year warranty for the SG-2020
radiotelephone must be purchased within 90 days after original pur-
chase date. Warranty provides factory repair, parts and labor for 3
years, and one free software upgrade during warranty period.
Warranty must be purchased directly from SGC, and does not include
any shipping charges.
51-91 Customized Front Panel (SG-2000 & SG-2020 Series) $2,500.00
Customized front panels for special applications or large purchases are available.
One time lot purchase not less than 30 units for the SG-2000 and not
less than 100 units for the SG-2020.
52-16 CHARGER: SOLAR CELL (SG-2020 Series) $1,100.00
Solar battery charger provides full charge to SG-2020 PowerPak.
Receiver can be operated directly from solar cell in overcast weath-
er conditions. Battery will charge in one sunny daylight exposure.
(Note: not a stock item).
52-82 CASE: SHOULDER BACK-PACK (SG-2020 Series) $350.00
Shoulder back-pack permits use of radio while in maneuvers. Pack
accommodates microphone/handset, and whip antennas in side
pouches. Separate pouch is for dipole antennas, reserve batteries
and DC/DC charger.
(Note: not a stock item).
52-83 CASE: RUGGED TRAVEL (SG-2020 Series) $189.95
Fully waterproof and floating travel case can be immersed to
depths of 10 feet. The virtually indestructible case is equipped
with an air pressure lock. Case accommodates one SG-2020 unit
with microphone and power cable. Dimensions are 11x10x5 inches.
(Note: not a stock item).
52-96 AMPLIFIER: ONE KW - MODEL SG-500 SmartPowerCube™ $ 1,395.00
The SmartPowerCube™ unit provides in excess of one KW DC input
for 500 watts power output. Designed for mobile and base station
operation at 13.8 VDC input voltage and 40 Amps for PEP, 80
amps for CW output. Fully microprocessor controlled for all func-
tions including 7 band selections, PTT, VSWR protection, input
power from 50 to 150 watts, collector current balance and level
and operating temperature control. All functions are selected by
sensing only the drive input power and frequency. Amplifier will
work with any SSB, AME, CW or RTTY transmitter or transceiver
from 1.8 to 30 MHz and 50 to 150 watts. No control connections
are required from the driver unit.”,12x12x12 in””
52.00 EXTERNAL RADIO ACCESSORIES
51.00 INTERNAL RADIO ACCESSORIES
68
SGC Inc. SGC Building, 13737 S.E. 26th St. Bellevue, WA. 98005 USA
P.O.Box 3526, 98009 Fax: [phone] or 746-7173 Tel: [phone] or 1-800-259 7331
E-mail: [e-mail] Web site: http://www.sgcworld.com
© 1998 SGC Inc