Technical information

SGC Inc. SGC Building, 13737 S.E. 26th St. Bellevue, WA. 98005 USA
P.O.Box 3526, 98009 Fax: [phone] or 746-7173 Tel: [phone] or 1-800-259 7331
E-mail: [e-mail] Web site: http://www.sgcworld.com
5
© 1998 SGC Inc.
4.0 INSPECTION UPON RECEIPT
Upon receipt, open the shipping carton and inspect your SG-2020
transceiver carefully for any signs of damage. After removing all
packing materials, check that all exposed controls move freely, and
that the enclosure has no dents or scratches. If you notice any
damage to the unit, document it completely and contact the ship-
ping company immediately. Save all packing materials for possi-
ble future use.
4.1 INSTALLATION ACCESSORIES
Please check to see that the following items are included in your
shipping carton:
(1) 1 - SG-2020 Transceiver (catalog #05-01)
(2) 1 - microphone (catalog #52-26)
(3) 1 - power cable and connector (1 meter, #14 gauge)
(4) 1 - Front Flip Foot (catalog #05-43)
(5) 1 - SG-2020 Operator’s Manual
(6) 3 - QSL cards
A quick-start information guide is printed on the inside of the SG-
2020 packing carton. Use this handy reference as soon as you
receive your SG-2020 unit.
5.0 MODES OF OPERATION (USB, LSB, CW,
DATA, AM)
5.1 VOICE (USB, LSB)
Voice communication is accomplished using either upper or lower
sideband. To display the current operating mode, press "BW".
The display will indicate the current mode and the bandwidth filter
setting. To change modes, press REV while holding the "BW"
button down. When operating in the ham bands, LSB is normally
used below 10 MHz, and USB is used above 10 MHz. The SG-
2020 will retain the operating mode and bandwidth settings until a
different frequency is chosen using one of the memory selections.
Favorite frequencies can be stored in any of the 20 memories,
including the mode and bandwidth settings.
Note: Voice operation will not function if the unit is in “CW” mode.