Specifications

50
8. Set power to HI
9. Set the radio to AM mode or CW and any carrier.
10. Key "push to talk" switch on microphone, and observe the light
bulb. The light should come on if the radio is transmitting.
Observe that the light is not as bright as step 5.
11. Set the radio to SSB mode
12. Key "push to talk" switch on microphone and talk into the
microphone. Observe the light bulb comes on when you talk.
CCoouupplleerr TTeesstt PPrroocceedduurree::
1. Connect coupler to the radio and disconnect antenna from coupler.
2. Connect "AC to Alligator Clips Cable" to the SG-235 antenna jack.
3. Screw light bulb into "AC Adapter"
4. Plug AC Adapter and light bulb into "AC to Alligator Clips Cable" that
is attached the coupler. [see figure below]
5. Turn on the radio and set to CW mode. Turn on the coupler
6. Key "push to talk" switch on microphone, and observe light bulb. The
light should come on if the radio is transmitting.
SGC Inc. SGC Building, 13737 S.E. 26th St. Bellevue, WA 98005 USA
P.O. Box 3526, 98009 Fax: [phone] Tel: [phone] or 1-800-259 7331
E-mail: [e-mail] Web site: http://www.sgcworld.com
© 1998 SGC Inc
SG-235 Manual
SG-2000 Radio
RF IN-OUT
RF GND