Specifications

AppendixÑ QMS System
Introduction
SGCÕs QMS (Quick Mount System) is the newest addition to the many outstanding
products manufactured by SGC, Inc. that incorporate the latest technological
developments in both design and craftsmanship. Featuring state of the art
technology in microprocessor-based communication equipment, the QMS rep-
resents high reliability backed by over 28 years of communication experience.
NOTE: SGC, Inc. retains the right to change, modify, delete and
add to the QMS series at any time without notice.
Unpacking QMS
We recommend unpacking the QMS antenna system and inspecting the con-
tents. This is necessary to ensure that no damage has occurred due to shipping
and that all items are accounted for as verified from the packing list as follows:
One QMS Manual
One Warranty Card
One QMS Black Anodized Assembly complete
with four straps (each two feet long)
Note: If the QMS is purchased in a package configuration, please refer to the
coupler and antenna manuals for their packing lists of the items supplied.
QMS Installation Instructions
The QMS (Quick Mount System) antenna and coupler system can be mounted in
virtually any location convenient to the user. Some consideration may be
given, however, to the items listed below:
Installation Considerations
1. Locate the QMS system as far from the engine as possible. This should
reduce interference generated by the engine, spark plug noise, etc. from get-
ting into the antenna system.
2. If possible, mounting your QMS in an area clear of objects will reduce
the danger of damaging the QMS. For instance, if driving in rough terrain, the
QMS is likely to be hit by trees, stumps, or rocks. If the unit were mounted on
the back of the vehicle, damage would be less likely to occur than if a side
mount was used.
A-1
© 1998 SGC Inc
Appendix - QMS System
SGC Inc. SGC Building, 13737 S.E. 26th St. Bellevue, WA 98005 USA
P.O. Box 3526, 98009 Fax: [phone] Tel: [phone] or 1-800-259 7331
E-mail: [e-mail] Web site: http://www.sgcworld.com