User`s guide

007-4834-001 25
Chapter 3
3. Operating Storage Enclosures
This chapter describes the operation of the storage enclosures in the following sections:
• “Turning the Power On” on page 25
• “Turning the Power On after an Unexpected Shutdown” on page 27
• “Turning the Power Off” on page 30
• “Monitoring Status with Software” on page 31
• “Checking the Indicator Lights” on page 32
• “Moving the Enclosure” on page 37
Note: All of the procedures in this chapter apply to both the controller enclosures and
the expansion enclosures.
Turning the Power On
If the storage enclosure was turned off due to an unexpected shutdown or a power
failure, follow the instructions in “Turning the Power On after an Unexpected
Shutdown” on page 27.
Danger: Severe electrical shock can occur. Never turn on the power to any
equipment when there is evidence of fire, water, or structural damage. If there is
evidence of damage, call the factory or appropriate service organization for assistance.
Depending on the current service agreements, you may need to send the unit back to
the factory for repair/replacement.