User`s guide

38 007-4834-001
3: Operating Storage Enclosures
Removing the Enclosure
To remove the enclosure from the rack, follow these steps:
1. Unsnap the side brackets from the front of the enclosure (see Figure 3-6).
2. Unscrew the front bezel from the mounting pins.
3. Using a flat-blade screwdriver, carefully remove the bezel from the front of the
drive enclosure. You must remove the bezel before you can remove the enclosure
from the rack.
Figure 3-6 Removing the Front Bezel and Front Retention Screws from the Enclosure
4. It is highly recommended that you remove all of the modules and disks from the
enclosure to make it lighter and easier to remove. See Chapter 4, “Replacing
Enclosure Components” for information about depopulating an enclosure.