User`s guide

54 007-4834-001
4: Replacing Enclosure Components
17. Does any component have a Needs Attention status?
– Yes – Click the Recovery Guru toolbar button in the Array Management
Window, and complete the recovery procedure. If a problem is still indicated,
contact Customer and Technical Support.
– No – Go to the next step.
18. Create, save, and print a new storage array profile.
As shown in Figure 4-7, the SFP assembly consists of an active SFP transceiver unit
(callout 1), and the fibre optic cable assembly (callout 2) that connects with it. Or,
the SFP may have a passive SFP transceiver (callout 3) that is integrated with a
copper cable assembly (callout 4).
Figure 4-7 SFPs and Cable Used