User`s guide

62 007-4834-001
4: Replacing Enclosure Components
Important: Depending on how long it takes you to complete step 2, TPSSM may
report a loss of redundancy error on the expansion enclosures in the loop. This error
will not interfere with data flow, and will disappear after you finish installing the
expansion enclosure(s).
4. Use TPSSM to check the status of the new drives and correct any errors found.
5. Use TPSSM to configure the new drives.
Figure 4-9 Adding a New Expansion Enclosure to an Existing RAID Enclosure