User`s guide

86 007-5688-001
7: BIOS
SEL PEF Configuration
PEF Support
Select Enabled to enable the function of Platform Event Filter (PEF) which will interpret BMC
events and perform actions based on pre-determined settings or events and performs actions based
on pre-determined settings or 'traps' under IPMI 1.5 specifications. For example, powering the
system down or sending an alert when a triggering event is detected. The default is Disabled.
PEF Action Global Control
Note: Available if the item-PEF Support is enabled.
These are the different actions based on BMC events. The options are Alert, Power Down, Reset
System, Power Cycle, OEM Action, Diagnostic Interface.
Alert Startup Delay
Note: Available if the item-PEF Support is enabled.
This feature inserts a delay during startup for PEF alerts. The options are Enabled and Disabled.
PEF Alert Startup Delay
Note: Available if the item-PEF Support is enabled.
This sets the pre-determined time to delay PEF alerts after system power-ups and resets. Refer to
Table 24.6 of the IPMI 1.5 Specification for more information at www.intel.com. The options are
No Delay, 30 sec, 60 sec, 1.5 min, 2.0 min.
Startup Delay
Note: Available if the item-PEF Support is enabled.