User`s guide

Care and Maintenance 4-35
OG L
12. Remove the paper to right directions, and close the Fuser Unit Cover.
Figure 4-66. Clearing Paper from the Paper Feed Area (12)
WARNING!
The Fuser Unit is very hot. Do not touch any parts of the Fuser Unit
except those parts which are used to remove the paper.
It is better to use the Bamboo Tweezers to remove the paper. (The Bamboo
Tweezers is an attached accessory.)
NOTE:
Remove (draw out) the paper from the Fuser horizontally. If the paper was
drawn out on an angle, the Heat Roller may be soiled with the toner, and it
causes degradation of print quality.
Do not draw out the paper to the left direction. If the paper is drew out to
the left direction, the Fuser Web is bloused and it may be twined around
the Heat Roll.
0 2