User`s guide

Web Utilities 6-25
OG L
HCF Control
The HCF Control page is displayed when you select HCF Control if optional HCF is
installed.
Figure 6-20. System-Tray (4)
You can select “Normal Pick Mode” or “Prior Pick Mode”.
❒ Normal Pick Mode
The printer feeds a paper from the HCF tray after last paper is fed from the
standard tray (Tray 1/2) when the tray is switched from the standard tray to
the HCF tray.
In this mode, there is an interval between last paper fed from the standard tray
and first paper fed from the HCF tray.
❒ Prior Pick Mode
When the tray is switched from the standard tray to the HCF tray, the printer
starts to feed a paper from the HCF tray before feeding a paper from the
standard tray if the data processing of the paper fed from the HCF has
completed.
The paper fed from the HCF tray stops at the HCF exit, and is fed
continuously after last paper fed from the standard tray.
The tray switching time at Prior Pick Mode is shorter than Normal Pick Mode.
However more papers may be wasted than Normal Pick Mode when paper
jam or an error occurred.
Also there are some limitations when using this mode. See “Printer Notice”
on page 5-7 for detail.
The settings on this page reflect what is set on the Operator Control Panel. If you
make changes to this page and click the Submit button, the changes will be reflected
on the Operator Control Panel.
0 2