User`s guide

2-14 Control Panels
OG L
Options
■ Wait Timeout
Defines the waiting period (in seconds) from reception of last data to the
reception of next data. If data is not received within the defined period, the job is
cancelled. A command from the host will override the OCP setting.
■ LPD Queuing
Can be set to enable or disable. When set to disable, printer does not accept next
job via LPR/LPD protocol until current job process is completed.
■ Duplex Always
Can be set to enable or disable. When set to enable, the printer will always prints
the job by duplex mode.
■ Print Density
Print Density can be adjusted to five settings: Light, Semi-Light, Middle, Semi-
Dark or Dark.
■ Auto Proof Sample
This function provides the automatic proof sample printing instead of manually
pressing the “Sample” button on the OCP. Print interval of the sample page can be
set from 0 to 5,000 every 500 sheet (0, 500, 1,000, 1,500, ... 5,000). For example,
If interval is set to “500”, then printer automatically duplicates the proof sample
to the Sample Tray every 500 sheet during printing. If the interval is set to “0”,
this function is disabled.
■ Cover Insert Mode
Defines the mode of the Cover Inserter when it is installed. Set to “Cover Insert”
when Cover Inserter is used. Set to “Bypass” when Cover Inserter is not used.
PostScript
■ Print Errors
Can be set to enable or disable. When set to enable, the printer will prints error
page when PostScript error is occurred.
■ Best Fit
Can be set to enable or disable. When set to enable, the printer will prints the page
image to fit the paper size.
■ Job Timeout
Defines the time limit (in seconds) for processing of the PostScript job.
■ Halftone Density
Halftone Density can be adjusted to three settings: Light, Medium or Dark..
NOTE:
The Halftone Density menu is only displayed when the Halftone Selection
in the Service menu is enabled.
0 4