User guide

30 007-5900-001
4: Chassis Maintenance
Replacing the Power Supply Modules
The system is equipped with two power supply modules for redundancy. They are hot-swappable.
Note: A server configured with multiple GPGPU cards may not be configured with redundant
power supplies. In this case, the power supplies are not hot-swappable.
Removing the Power Supply Modules
To remove the power supply modules, use the following steps:
1. As shown in Figure 4-7, push the green latch in the direction shown while pulling the
module out of the chassis by the handle.
2. Repeat step 1 to remove the second power supply module.
Figure 4-7 Removing a Power Supply Module