User Manual United Automotive Electronic Systems Co., Ltd.
Table of contents 1 PRODUCT IDENTIFICATION ....................... 3 2 GENERAL PRODUCT DESCRIPTION ......... 4 2.1 MAIN FUNCTION AND PROPERTIES OF THE PRODUCT 4 2.2 INTENDED USE ........................................... 4 2.3 SAFETY AND WARNING NOTES ................ 5 2.4 LABELING OF THE PRODUCT .................... 6 2.5 DIMENSIONS AND WEIGHTS...................... 6 2.6 POWER CONSUMPTION / POWER OUTPUT6 2.7 INFORMATION ON DISPOSAL AND RECYCLING 6 3 SYSTEM DESCRIPTION .............................. 6 3.
1 Product identification Product designation: BASE2.
2 2.1 General product description Main function and properties of the product BASE station is an anti-theft controller integrated at the end of the coil,it interact data with Body Control Module(BCM),then BCM certificate with Engine Control Module(ECM),to implemente anti-theft function. UAES points out that the ASIL-classified requirements as per ISO 26262, their implementation and the assumptions made for this purpose are documented in chapter2.3.
Provided that BASE2.0 is used within the conditions (environment, application, installation, loads) as described in this USER MANUAL and the corresponding agreed upon documents, UAES ensures that the product complies with the agreed properties. The product is considered fit for the intended use when the product successfully has passed the tests in accordance with the USER MANUAL and agreed upon documents. Agreements beyond this require the written approval by UAES.
7) Installation position should be way from oil pollution、damp、spattering water. 8) Fixing of Base station wiring harness should be reliable, do not support wiring harness with Base station. 9) Extra mechanical vibration and external force impact should be avoided due to inappropriate installation position, meanwhile, installation position should not be at point of resonance of car body.
4 4.1 Technical data with measured variables and measuring conditions Functions, function states (modes of operation), functional characteristics and boundary conditions The ambient temperature should be from -40 ºC to 85 ºC; the max humidity is from 80 percent; and the atmospheric pressure is from 86kpa to 106kpa. Under these conditions, the product rated performance is guaranteed. 4.2 Mechanical characteristics The product’s vibration characteristics is shown as follow.
Please pay special attention to the safety and warning notes in chapter 2.3. 5 6 6.