Technical Guide

TECHNICAL GUIDE v2.6
www.sgs.com 16
11. Firmware Update
For updating the firmware is necessary to open the box/case. Due to this, it is
necessary to carry out this process out of the grain, with no dust and humidity.
Preferably in an indoor room.
It can be done with any programming device compatible with STM32
microcontroller. ST-LINK v2 programmer with TC2030-IDC-NL connector is
recommended.
Program can be downloaded in following url:
https://www.st.com/en/development-tools/stsw-link004.html
Figure 14.ST-LINK v2, adapter and TC2030-IDC-NL connector
The programmer is connected to the device through programming connector:
Figure 15.Programming connector in MTU