Technical Guide

TECHNICAL GUIDE v2.6
www.sgs.com 3
2. General and safety information
Please, read carefully this section before installing and using Smart Warehouse
Device:
- In document, the term Smart Warehouse Device encompasses both the
MTU and the RTU unit with their sensors.
- Please read carefully this document.
- NEVER submerge the device in any liquid.
- Keep the device in a dry place and away from any liquids that might spill.
- Smart Warehouse Device contains electronic components that are highly
sensitive and can be accessed from outside; handle the device with great
care and avoid hitting or scratching any of the surfaces.
- Do not let the electronic parts come into contact with any steel elements,
to avoid injuries and burns.
- Do not remove any of the connectors.
Check the product specifications section for the maximum allowed power
voltage and amperage range and always use batteries that work within that
range.
- SGS will not be responsible for any malfunctions caused by using the device
with any batteries, power supplies or chargers other than those supplied by
SGS.
- Keep the device within the range of temperatures stated in the
specifications section.
- Do not connect or power the device with damaged cables or batteries.
- Place the device in a location that can only be accessed by maintenance
operatives (restricted area).
- In any case, keep children away from the device at all times.
- If there is an electrical failure, disconnect the main switch immediately and
disconnect the batteries.
- Check that the frequencies and power levels of the radio communication
modules and the integrated antennas are appropriate for the location in
which you intend to use the device.