User Manual

S3i Product & Service Manual 7
- This was originally designed to be touch-only game, not supporting game controller. This is not
something we can help you with.
- For Android, you can play by using our mapping service in SHAKS GameHub app downloadable
from Google Playstore.
Note and Useful tips
Charge battery by charging cable from a computer or USB power charging device.
- Low battery status : Fast blinking
- Under charging : Slow blinking
- Fully charged : Stop blinking
- It is recommended to be charged by USB cable. But you can charge it by power bank or general
power charger(5V-1A) as well. When you use ‘higher charger and fast speed charger’, please do it in
a short time, because this might shorten the life of the battery
iOS, iPad OS or mac OS (Apple), Android device connected via wire, all are not compatible with
mapping service. Also, all consoles such as Xbox, PlayStation, Nintendo Switch is not supporting
mapping mode.
In Wired connection, SHAKS Gamehub app is not working. This is under development now.
Mouse Mode works only on Android Mode. In other mode, it is not working.
iOS, iPad OS is not allowing any mapping application by their official policy.
Windows is not supporting mapping. Alternatively, you can use each game setting - key re-
assignment program. For example, in the Steam game, you can edit key mapping in the controller
setting menu. or try to use x360ce, Xpadder program.
Samsung Galaxy Note 4 S-LTE like old version OS (6.0.1 lower) can allow only S-pen. So, not able
to use multi-touch funciton
Back to Contents
FQA in troubles in initial setup
I can't connect S3i to PC.
In most cases, this happens because the correct sequence is not followed. Do not insert the cable
first. Keep pressing "Start button" then connect the cable
Bluetooth connection is not established, interrupts or lost .
Quite often, BT scanning takes time and causes trouble. In most cases, rebooting your device will
solve the problem. You can reset the gamepad by pressing "Select+Start" button for more than 6
seconds. This will cause the gamepad to enter into pairing mode with default values (i.e deleting all
previous pairings in memory).
Please check following trouble shooting by yourself.
1. Pair the gamepad with other 2-3 devices to compare
2. Check the driver is installed as per below section
3. Check any RF obstacles between device and gamepad as per below section