User's Manual
Table Of Contents
- 1 Product introduction
- 2 Printer installation
- 3 Printer operation
- 3.1 Print head pressure and pressure position adju
- 3.2 Sensor position adjustment
- 3.3 Function of indicator light, button and LCD
- 3.4 Function of calibration
- 3.5 Print settings
- 3.6 Physical distance setting
- 3.7 Serial interface settings
- 3.8 Network Settings
- 3.9 Parallel interface settings
- 3.10 Date and time
- 3.11 Offline printing
- 3.12 Service
- 3.13 Consumables library
- 3.14 File operation
- 3.15 Printer debugging
- 3.16 Sensor settings
- 4 Routine maintenance
- 5 Troubleshooting
- Appendix
- Appendix 1 Technical specification
- Appendix 2 Self-test page
- Appendix 3 Print and paper output position
- Appendix 4 Communication interface
- Appendix 5 Guide for paper loading under peel-off
- Appendix 6 Guide for paper loading under label rew
- Appendix 7 Guide for paper loading under cutter mo
- Appendix 8 Menu on human-machine interface
- Appendix 9 FCC statement
BTP-7400 User’s Manual
- 5 -
2 Printer installation
2.1 Installation position
Flatly place the printer on the operation table, which must be
waterproof, moisture proof and dustproof. The maximal tilted angle
should not exceed 15° during installation.
2.2 Printer host connection
1) Ensure the printer is turned off;
2) Connect one end of the AC power input cable with the printer
host;
3) Connect the other end of the AC power input cable with the 220V
power socket.
Caution:
If the printer will not be used for a long time, please turn off the printer
power.
2.3 Communication cable connection
1) Ensure the printer is turned off;
2) Insert the communication cable into the suitable interface of
printer, and fix it with screw or latch spring of the plug;
3) Connect the other end of the communication cable to the host.
Caution:
Don’t connect or disconnect the communication cable when the power has
not been turned off.