User's Manual
Table Of Contents
- 1 Product introduction
- 2 Printer installation
- 3 Printer operation
- 3.1 Print head pressure and pressure position adju
- 3.2 Sensor position adjustment
- 3.3 Function of indicator light, button and LCD
- 3.4 Function of calibration
- 3.5 Print settings
- 3.6 Physical distance setting
- 3.7 Serial interface settings
- 3.8 Network Settings
- 3.9 Parallel interface settings
- 3.10 Date and time
- 3.11 Offline printing
- 3.12 Service
- 3.13 Consumables library
- 3.14 File operation
- 3.15 Printer debugging
- 3.16 Sensor settings
- 4 Routine maintenance
- 5 Troubleshooting
- Appendix
- Appendix 1 Technical specification
- Appendix 2 Self-test page
- Appendix 3 Print and paper output position
- Appendix 4 Communication interface
- Appendix 5 Guide for paper loading under peel-off
- Appendix 6 Guide for paper loading under label rew
- Appendix 7 Guide for paper loading under cutter mo
- Appendix 8 Menu on human-machine interface
- Appendix 9 FCC statement
BTP-7400 User’s Manual
- 20 -
3.3.2 Function of Button
Button
Printer
status
Function explanation
MENU
Standby ①
Under standby status, the user can press [Menu]
button for a short time to enter the menu display
interface.(① -⑥refer to below notes)
Menu ②
In menu display interface, the [menu] and
navigation buttons can be cooperated to perform
relevant configuration or query operation.
Text input ③
When the printer is in the status of text input, e.g.
input wireless SSID, the user can press [Menu]
button for a short time to select the current
characters, and press [Menu] button for a long
time to confirm the input at this time.
FEED
Non-printing
status
When press the [FEED] button, the printer will
feed one label if non-continuous paper is used,
while feed paper for a distance of one label length
if continuous paper is used (the label length
parameter that printer saved).
PAUSE
Non-printing
status
Under standby mode, the printer will enter pause
status by pressing the [Pause] button, and the
printer will return to standby status if press the
[Pause] button again.
Printing
status ④
The printer will stop the current print job
temporarily if press the [Pause] button during
printing, and it will continue the previous print job
if press the [Pause] button again.