User's Manual
Table Of Contents
- 1 Product introduction
- 2 Printer installation
- 3 Printer operation
- 3.1 Print head pressure and pressure position adju
- 3.2 Sensor position adjustment
- 3.3 Function of indicator light, button and LCD
- 3.4 Function of calibration
- 3.5 Print settings
- 3.6 Physical distance setting
- 3.7 Serial interface settings
- 3.8 Network Settings
- 3.9 Parallel interface settings
- 3.10 Date and time
- 3.11 Offline printing
- 3.12 Service
- 3.13 Consumables library
- 3.14 File operation
- 3.15 Printer debugging
- 3.16 Sensor settings
- 4 Routine maintenance
- 5 Troubleshooting
- Appendix
- Appendix 1 Technical specification
- Appendix 2 Self-test page
- Appendix 3 Print and paper output position
- Appendix 4 Communication interface
- Appendix 5 Guide for paper loading under peel-off
- Appendix 6 Guide for paper loading under label rew
- Appendix 7 Guide for paper loading under cutter mo
- Appendix 8 Menu on human-machine interface
- Appendix 9 FCC statement
BTP-7400 User’s Manual
- 31 -
Caution
If the user software can also set the print speed, the print speed
parameters in the user software should be set;
As for the paper / ribbon with poor quality, the print quality will be degraded
if a higher print speed is set, e.g. the printout is in light color or has trails
and other problems. Thus, the user should set an appropriate print speed
according to the features of paper/ribbon with reference to the speed in
the following table, in order to achieve the best match of work efficiency
and print quality.
3.5.6 Darkness settings
Set method: Menu → Settings → Print settings →Print darkness (or
Menu →Common settings →Print darkness).
Caution
If the user software can also set the print darkness, the print darkness
parameters in the user software should be set;
The settings of darkness should match with the features of selected
paper/ribbon; otherwise, the print quality will be degraded. If the darkness
is set too high, it will cause trails, image adhesion and other issues; if the
darkness is set too low, it will bring unclear printout;
As for the limitation settings of recommended speed and darkness for
ribbon with different materials, the printout may be unclear if the printer
settings exceed the limitation settings. (for reference only, the actual result
of the user’s debugging will prevail):