User's Manual
Table Of Contents
- 1 Product introduction
- 2 Printer installation
- 3 Printer operation
- 3.1 Print head pressure and pressure position adju
- 3.2 Sensor position adjustment
- 3.3 Function of indicator light, button and LCD
- 3.4 Function of calibration
- 3.5 Print settings
- 3.6 Physical distance setting
- 3.7 Serial interface settings
- 3.8 Network Settings
- 3.9 Parallel interface settings
- 3.10 Date and time
- 3.11 Offline printing
- 3.12 Service
- 3.13 Consumables library
- 3.14 File operation
- 3.15 Printer debugging
- 3.16 Sensor settings
- 4 Routine maintenance
- 5 Troubleshooting
- Appendix
- Appendix 1 Technical specification
- Appendix 2 Self-test page
- Appendix 3 Print and paper output position
- Appendix 4 Communication interface
- Appendix 5 Guide for paper loading under peel-off
- Appendix 6 Guide for paper loading under label rew
- Appendix 7 Guide for paper loading under cutter mo
- Appendix 8 Menu on human-machine interface
- Appendix 9 FCC statement
BTP-7400 User’s Manual
- 35 -
Caution
Fig. A indicates that the print position is upper than the correct position.
Adjust it to the negative direction;
Fig. B indicates that the print position is lower than the correct position.
Adjust it to the positive direction.
2) Transversal print position adjustment
When the printout is like Fig. D and Fig. E, the user should adjust
the transversal print position to Fig.F. The adjustment method is:
Menu → Settings → Print settings→Transversal deviation(or Menu
→Common settings → Transversal deviation).
Fig. 3.5.8.2
Caution
Fig. D indicates that the print position is at the left of the correct position.
Adjust it to the negative direction;
Fig. E indicates that the print position is at the right of the correct position.
Adjust it to the positive direction.