User's Manual
Table Of Contents
- 1 Product introduction
- 2 Printer installation
- 3 Printer operation
- 3.1 Print head pressure and pressure position adju
- 3.2 Sensor position adjustment
- 3.3 Function of indicator light, button and LCD
- 3.4 Function of calibration
- 3.5 Print settings
- 3.6 Physical distance setting
- 3.7 Serial interface settings
- 3.8 Network Settings
- 3.9 Parallel interface settings
- 3.10 Date and time
- 3.11 Offline printing
- 3.12 Service
- 3.13 Consumables library
- 3.14 File operation
- 3.15 Printer debugging
- 3.16 Sensor settings
- 4 Routine maintenance
- 5 Troubleshooting
- Appendix
- Appendix 1 Technical specification
- Appendix 2 Self-test page
- Appendix 3 Print and paper output position
- Appendix 4 Communication interface
- Appendix 5 Guide for paper loading under peel-off
- Appendix 6 Guide for paper loading under label rew
- Appendix 7 Guide for paper loading under cutter mo
- Appendix 8 Menu on human-machine interface
- Appendix 9 FCC statement
BTP-7400 User’s Manual
- 39 -
4) Parity bit
Query or set the parity bit to match with that of the host. The parity
bit can be set to: no parity, even or odd. Set method: Menu →
Settings →Serial interface settings→Parity bit.
5) Handshake mode
Query or set the handshake mode to match with that of the host.
The handshake mode can be set to: hardware handshake, software
handshake, or hardware handshake + software handshake. Set
method: Menu → Settings →Serial interface settings→Handshake
mode.
Caution
To improve the reliability of serial interface communication, it is
recommended to use the hardware handshake mode.
3.8 Network Settings
Caution
Set the printer network configuration according to this section, and the
printer can work normally only when the printer and the host are in the
same local area network.
1) Network selection
Select the required type of network. The printer supports wired or
wireless network and the printer factory default selection is a wired