User's Manual

BTP-7400 User’s Manual
- 41 -
5) Port number
Query or set the Ethernet TCP port number of printer according to
demands. The default value is 9100.
6) MAC address
Query the MAC address of current network (wired or wireless).
7) IP acquisition method
When the IP acquisition method is set to DHCP, the printer will
automatically obtain the IP address, subnet mask, default gateway
and other network parameters.
When the IP acquisition method is set to fixed IP, the printer will set
the IP address, subnet mask, default gateway and other network
parameters of the current configuration.
8) Wireless setting
This product supports two wireless modes: router mode and AP
(access point) mode.
 Router mode
Under router mode, the printer will automatically connect to the
user’s router and add into the user’s LAN after completing
configuration. The user can operate in the following steps:
A) The user queries the router configuration, including SSID,
security mode (NONE, WEP, WPA-PSK, WPA2-PSK),
encryption mode (determined by the security mode), and the
wireless password.