User's Manual
Table Of Contents
- 1 Product introduction
- 2 Printer installation
- 3 Printer operation
- 3.1 Print head pressure and pressure position adju
- 3.2 Sensor position adjustment
- 3.3 Function of indicator light, button and LCD
- 3.4 Function of calibration
- 3.5 Print settings
- 3.6 Physical distance setting
- 3.7 Serial interface settings
- 3.8 Network Settings
- 3.9 Parallel interface settings
- 3.10 Date and time
- 3.11 Offline printing
- 3.12 Service
- 3.13 Consumables library
- 3.14 File operation
- 3.15 Printer debugging
- 3.16 Sensor settings
- 4 Routine maintenance
- 5 Troubleshooting
- Appendix
- Appendix 1 Technical specification
- Appendix 2 Self-test page
- Appendix 3 Print and paper output position
- Appendix 4 Communication interface
- Appendix 5 Guide for paper loading under peel-off
- Appendix 6 Guide for paper loading under label rew
- Appendix 7 Guide for paper loading under cutter mo
- Appendix 8 Menu on human-machine interface
- Appendix 9 FCC statement
BTP-7400 User’s Manual
- 46 -
3.11 Offline printing
Under this mode, the printer can work independently without
connecting to the computer, which can save the user’s work space
and cost. The user can copy the files to be printed in one U disk or
SD card or download the files to the printer's internal FLASH disk in
advance, and then select the files stored in corresponding drive
letter, and input and confirm the quantity to be printed for the printer
to start printing. Definition of printer drive letter is as following:
Table 3.11-1
Caution
The recommended format of U disk or SD card for the system is FAT32.
Other formats are not supported at present. If the U disk or SD card
cannot be identified by the printer, please confirm whether the format is
correct or use the PC to format it to FAT32 format, and try again.
Print file: File consists of printer commands. As for the common word
documents, the print file can be made by the function “Print to file” of
printer driver. The name of print file only supports English, and all name
suffixes can be displayed.
Drive letter
Description
R
The printer's internal RAM memory. Its data are lost after
powering off.
E
The printer’s internal FLASH memory
B
SD card
A
U disk