User's Manual
Table Of Contents
- 1 Product introduction
- 2 Printer installation
- 3 Printer operation
- 3.1 Print head pressure and pressure position adju
- 3.2 Sensor position adjustment
- 3.3 Function of indicator light, button and LCD
- 3.4 Function of calibration
- 3.5 Print settings
- 3.6 Physical distance setting
- 3.7 Serial interface settings
- 3.8 Network Settings
- 3.9 Parallel interface settings
- 3.10 Date and time
- 3.11 Offline printing
- 3.12 Service
- 3.13 Consumables library
- 3.14 File operation
- 3.15 Printer debugging
- 3.16 Sensor settings
- 4 Routine maintenance
- 5 Troubleshooting
- Appendix
- Appendix 1 Technical specification
- Appendix 2 Self-test page
- Appendix 3 Print and paper output position
- Appendix 4 Communication interface
- Appendix 5 Guide for paper loading under peel-off
- Appendix 6 Guide for paper loading under label rew
- Appendix 7 Guide for paper loading under cutter mo
- Appendix 8 Menu on human-machine interface
- Appendix 9 FCC statement
BTP-7400 User’s Manual
- 48 -
3.13 Consumables library
This function is suitable for applications that require frequent
different paper switching. In the conventional mode, the printer
needs to start manual calibration or automatically start calibration
after changing with different paper, which wastes the paper. With
this function, the printer can be calibrated when different paper is
used for the first time, store the paper parameters and give a
number, thus the printer can call this type of paper via the number in
the follow-up printing without calibrating the printer, which can save
the paper.
1) Consumables storage
The printer needs to be calibrated when the paper is used for the
first time (Detail calibration method refers to 3.4 Function of
calibration). After successful calibration, save the current paper
information in the following method: Menu →Consumables library →
Consumables storage →Enter number (default setting: the number
adds 1 automatically). The number for consumables is 1-999.
2) Consumables switching and use
The user can select the number of consumables stored previously
to call the related parameters, and the HMI will display the related
parameters of the number. Please make sure the paper type and
parameters are consistent with that stored in the printer. The display
interface for calling the consumables is as following: