User's Manual
Table Of Contents
- 1 Product introduction
- 2 Printer installation
- 3 Printer operation
- 3.1 Print head pressure and pressure position adju
- 3.2 Sensor position adjustment
- 3.3 Function of indicator light, button and LCD
- 3.4 Function of calibration
- 3.5 Print settings
- 3.6 Physical distance setting
- 3.7 Serial interface settings
- 3.8 Network Settings
- 3.9 Parallel interface settings
- 3.10 Date and time
- 3.11 Offline printing
- 3.12 Service
- 3.13 Consumables library
- 3.14 File operation
- 3.15 Printer debugging
- 3.16 Sensor settings
- 4 Routine maintenance
- 5 Troubleshooting
- Appendix
- Appendix 1 Technical specification
- Appendix 2 Self-test page
- Appendix 3 Print and paper output position
- Appendix 4 Communication interface
- Appendix 5 Guide for paper loading under peel-off
- Appendix 6 Guide for paper loading under label rew
- Appendix 7 Guide for paper loading under cutter mo
- Appendix 8 Menu on human-machine interface
- Appendix 9 FCC statement
BTP-7400 User’s Manual
- 50 -
3.14 File operation
Caution
This function settings need password authorized by the manufacturer.
1) Upgrading
The user can copy the upgrading files to a U disk in advance to
upgrade the firmware via the U disk, including the upgrading of
applications, LCD program, monitoring program, EEP configuration
and all programs.
2) Delete
The user can delete certain files or file folders in the printer RAM
disk, FLASH disk, U disk or SD card via this function in the following
method: File operation → Delete → Select the letter → Select the
file.
3) Cut
The user can cut certain files or file folders in the printer RAM disk,
FLASH disk, U disk or SD card via this function in the following
method: File operation →Cut→ Select the letter → Select the file.
4) Copy
The user can copy certain files or file folders in the printer RAM disk,
FLASH disk, U disk or SD card via this function in the following
method: File operation →Copy→ Select the letter → Select the file.