User's Manual
Table Of Contents
- 1 Product introduction
- 2 Printer installation
- 3 Printer operation
- 3.1 Print head pressure and pressure position adju
- 3.2 Sensor position adjustment
- 3.3 Function of indicator light, button and LCD
- 3.4 Function of calibration
- 3.5 Print settings
- 3.6 Physical distance setting
- 3.7 Serial interface settings
- 3.8 Network Settings
- 3.9 Parallel interface settings
- 3.10 Date and time
- 3.11 Offline printing
- 3.12 Service
- 3.13 Consumables library
- 3.14 File operation
- 3.15 Printer debugging
- 3.16 Sensor settings
- 4 Routine maintenance
- 5 Troubleshooting
- Appendix
- Appendix 1 Technical specification
- Appendix 2 Self-test page
- Appendix 3 Print and paper output position
- Appendix 4 Communication interface
- Appendix 5 Guide for paper loading under peel-off
- Appendix 6 Guide for paper loading under label rew
- Appendix 7 Guide for paper loading under cutter mo
- Appendix 8 Menu on human-machine interface
- Appendix 9 FCC statement
BTP-7400 User’s Manual
- 51 -
5) Paste
Configuration description:
This function cooperates with the above cut and copy functions. The
user should perform copy and cut actions before pasting, and then
select corresponding directory to paste the previously cut or copied
files or directory. Operation method: File operation → Copy→ Select
the letter→Select the directory.
6) Capacity
Configuration description:
The user can query the printer's internal RAM, flash or U disk
capacity and usage conditions via this interface. Refer to the
following figure:
Caution
The recommended format of U disk or SD card for the system is FAT32.
Other formats are not supported at present. If the U disk or SD card
cannot be identified by the printer, please confirm whether the format is
correct or use the PC to format it to FAT32 format, and then try again.