User's Manual
Table Of Contents
- 1 Product introduction
- 2 Printer installation
- 3 Printer operation
- 3.1 Print head pressure and pressure position adju
- 3.2 Sensor position adjustment
- 3.3 Function of indicator light, button and LCD
- 3.4 Function of calibration
- 3.5 Print settings
- 3.6 Physical distance setting
- 3.7 Serial interface settings
- 3.8 Network Settings
- 3.9 Parallel interface settings
- 3.10 Date and time
- 3.11 Offline printing
- 3.12 Service
- 3.13 Consumables library
- 3.14 File operation
- 3.15 Printer debugging
- 3.16 Sensor settings
- 4 Routine maintenance
- 5 Troubleshooting
- Appendix
- Appendix 1 Technical specification
- Appendix 2 Self-test page
- Appendix 3 Print and paper output position
- Appendix 4 Communication interface
- Appendix 5 Guide for paper loading under peel-off
- Appendix 6 Guide for paper loading under label rew
- Appendix 7 Guide for paper loading under cutter mo
- Appendix 8 Menu on human-machine interface
- Appendix 9 FCC statement
BTP-7400 User’s Manual
- 75 -
Appendix 4.5 Wireless LAN interface
The wireless LAN interface is an optional interface.
Supports IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
protocols;
Supports WEP, WPA encryption methods;
Supports ICMP protocol;
Supports TCP, UDP protocols;
Supports IPv4 protocol;
Supports UDP protocol parameter configuration;
Supports to recover the default configuration via buttons;
Supports to configure the relevant information of wireless router
via HMI (Notes: It needs to press the [Menu] or [Exit] button for
a long time to complete the relevant information input of ESSID
and password).
Supports to check the SSID status of current Wi-Fi, connection
status (connected / not connected) and the signal strength of
router (shown in percentage %).