USER’S MANUAL RemovablePrinter BTP-P36 Shandong New Beiyang Information Technology Co., Ltd.
BTP-P36 User’s Manual Contents 1 Introduction.................................................................................... - 1 1.1 1.2 Outline........................................................................................- 1 Main features........................................................................................- 2 - 2 Main technical specification........................................................ - 3 2.1Technical specification............................................
BTP-P36 User’s Manual 5.2 WIFI interface........................................................................................- 27 - 6Installation printer........................................................................ - 29 6.1 The host accessories........................................................................... - 29 6.2 Precautions for using the printer........................................................- 29 6.3 Paper roll installation..............................................
BTP-P36 User’s Manual Declaration Information in this document is subject to change without notice. SHANDONG NEW BEIYANG INFORMATION TECHNOLOGY CO., LTD. (hereinafter referred to as “SNBC”) reserves the right to improve product as new technology, components, software, and firmware become available. If users need further data about this product, please feel free to contact your dealer or the manufacturer.
BTP-P36 User’s Manual SNBC has passed the following certifications: ISO9001 Quality Control System Certification ISO14001 Environmental Management System Certification OHSAS18001 Occupational Health and Safety Management System Certification IECQ QC 080000 Hazardous Substance Process Management System Certification BTP-P36 has passed the following certifications: Warning This is class A product. The product may cause radio interference in the working environment.
BTP-P36 User’s Manual General Safety Information Before installing and using the printer, please read the following items carefully. Safety instructions Warning: Don’t touch the tear bar of printer. Warning:The print head is a thermal element and it is at high temperature during printing or just after operation.Therefore please do not touch it and its peripherals for safety reasons. Warning: To prevent static electricity damages print head, do not touch either print head or connecting parts.
BTP-P36 User’s Manual 7) Do not let the water or the electric materials (like metal) go into the printer. If this happen, turn off the power. 8) The printer cannot print in the state without paper, otherwise it will seriously damage the print head. 9) In order to ensure the print quality and lifetime, you should use recommended paper or its equivalents. 10) When inserting or disconnecting each interface, you must turn off thepower, otherwise it may cause damage to the printer control circuit.
BTP-P36 User’s Manual -7-
BTP-P36 User’s Manual 1 Introduction 1.1 Outline BTP-P36 is a thermal removablelabel printer with high quality, fast speed, stable performance, long standby time and small portability. It is widely used in retail, government, law enforcement, insurance, logistics and other fields. The product is removable printer supporting for POS, BPLC, BPLE / BPLZ and other command sets, and provide characters, graphics, barcode and other printing functions.
BTP-P36 User’s Manual other accessories, and optional battery charger, car-mounted charger, IP54 protective cover, shoulder strap, pocket and other accessories. 1.
BTP-P36 User’s Manual 2 Main technical specification 2.1 Technical specification The parameters are under the standard test paper conditions. Model BTP-P36 removable printer Print method Thermal, position in the middle Print resolution 203dpi Print width (Max.) 72mm Print speed Max102mm/s. Factory default value is 76.2mm/s Print length 10-1000mm Paper out method Tear-off mode, peel-off mode (Present) Memory 64MB RAM，16MBFlash Standard configuration : USB 2.
BTP-P36 User’s Manual 1D barcode (ESC/POS UPC-A, UPC-E, JAN13 (EAN13), JAN 8 (EAN8), command) CODE39, ITF, CODABAR, CODE93, CODE128 2D barcode (ESC/POS command) PDF417, QRCODE, MAXICODE, GS1 Built-in standard ASCII character (fontA~H,P~V,0,GS); Built-in scalable character set; user-defined dots or scalable character set; Users download Character support (BPLZ/BPLE user-definedcharacter set, supportsEnglish command) (ASCII),simplified Chinese (18030 or GBK), traditional Chinese, the United States, B
BTP-P36 User’s Manual paper roll ID 12.5mm～19.1mm paper roll OD Max 67mm Paper width Battery capacity Charging method Battery Charging time Continuous printing time 25.4-80mm(Continuous and adjustable) 2600mAh, lithium battery Can be charged without take out the battery 3.
BTP-P36 User’s Manual Ratings dropping 1.5 meters resistance ESD Vibration resistance Reference Physical Size features Reference weight Air discharge 10KV, pass Contact discharge 8KV, pass can work normally under vibration condition (carry-on or vehicle travel may have vibration) 186.5mm×117mm×81.5mm(width x length x height) About 638g（contain battery） 2.2Paper specification 2.2.1 Parameters of label paper Mount paper width: 80±0.5mm/ Label width: 72+0.
BTP-P36 User’s Manual When the printer leave the factory, we can the add sensor and position configuration according to the requirement. The mark sensor is located on the left side (paper feed direction) of the paper by default, and is used to detect the mark of paper front with width of 80 mm, Figure 1 shows the position.
BTP-P36 User’s Manual 3) The reflectivity of the mark part is less or equal to 15%, and the reflectivity of the other part of the paper in the direction of the paper mark width is more than or equal to 85%. There should be noany pattern in the area between the two marks like advertisement. 2.3 Print and tear-off position 2.3.
BTP-P36 User’s Manual Distance from the print Distance from the print content to the left content to the right edge(L3) edge(L4) 72mm 4mm 4mm 25.4mm // // Paper Print width (L1) width (L2) 80mm 25.4mm 2.3.
BTP-P36 User’s Manual 3Appearance and components 3.
BTP-P36 User’s Manual 19——Tear-off bar 20——Reflective sensor 21——Mechanism bracket 2 22——Platen roller pothook 23——Transmissive2 24——Print head Caution: Paper guide centering 25.4mm ~ 80mm continuously adjustableto adapt to a variety of printer paper width 3.2 Accessories introduction The following contents are introduction and pictures of accessories like battery, power cable, power adapter, battery charger, car charger, IP54 protective cover, shoulder strap.
BTP-P36 User’s Manual 1.American 2APower Standard area use adapter 2.Charge the (American printer standard) 3.Match up lithium a battery charging stand to charge a single lithium battery 1.British standard 2APower areas use adapter (British 2.Charge the standard) printer 3.Match up a lithium battery charging cradle to charge a single lithium battery 1.European 2APower standard area use adapter 2.Charge the (European printer standard) 3.
BTP-P36 User’s Manual lithium battery Use for charging a lithium battery Lithium battery charging cradle Connect patch cord 5APower and lithium battery adapter charging cradle and charge four lithium battery at the same time 1.Chinese standard AC power cord area use (Chinese 2. 5APower standard) adapterAC power cord 1. American AC power cord standard area use (American 2.
BTP-P36 User’s Manual 1. British standard AC power cord areas use (British 2. 5A Power standard) adapter AC power cord 1.European AC power cord standard area use (European 2. 5A Power standard) adapter AC power cord One pin Connect 5A power transfers into adapter and lithium four pins patch battery charging cord cradle and charge four lithium batteries at the same time Car charger 1.Charge the printer 2.
BTP-P36 User’s Manual Pocket This is optional accessory used for BTP-P36 removable printer Shoulder strap This is optional accessory used for BTP-P36 - 15 -
BTP-P36 User’s Manual 4 System function and settings 4.1 Explanation of panel 4.1.1 Appearance panel 4.1.2 Button function Button Power button Configuration button Function Explanation In the power on state, press [Power] button for a long time to turn off the printer. In the power off state, press the [Power] button for a long time to turn on the printer. 1. On / off In the working stat, press [Power] button 2. Sleep / wake-up for a short time to enter the sleep mode.
BTP-P36 User’s Manual the current menu operation is selected and executed Press the [paper feed] button in the idle state: paper feed Press the [paper feed] button in the working state: pause printing Press the [paper feed] button in the pause state: 1. If you paused a print job before, resume printing 2. If there is no pause print job, return to the main page Press the [UP] button in the configuration state: 1. Select the previous menu 2.
BTP-P36 User’s Manual sensor 3 4 5 6 7 Print 00~30 darkness Print speed 02~04 IPS Paper feed No feeding.Start when start calibration. Fix up position to label Close No feeding. Start cover and calibration. Fix feed paper position to label retract POS command paper can be optional.
BTP-P36 User’s Manual offset 7 Vertical 0~199 offset 8 Tear-off 0~199 position 9 Detect Able; Unable paper when idle 10 Back to previous level 3 1 Paper 0~255 sensor threshold 2 Mark 0~255 sensor threshold 3 0~255 strength Sensor setup Code setup Label light 4 Mark light 0~255 strength 5 Sensor Display the information information of sensor 6 Back to previous level 4 WLAN configuration - 19 - 1 IP address IP address 2 Subnet Subnet mask mask
BTP-P36 User’s Manual 3 Gateway Gateway 4 IP protocol TCP UDP 5 WLAN port WLAN port setup WLAN Port information 6 information 7 8 BT code BI information 9 Back to previous level 5 1 Sleep time Not sleep 10s 20s 30s 60s3min 5min 2 The time of Not power off automatic automatically5min, power off 10min, 15min, 20min, 30min, 40min 3 Other configurations RTC time 00:00 setup 4 RTC date 01/01/00 setup 5 6 7 Language Chinese setup ENGLISH Command ESC/POS language BPLZ/BPLE
BTP-P36 User’s Manual buzzer 9 USB mode API modeClass mode 10 Back to previous level 6 7 2 3 4 5 Save exit Save /Neglect Printer information output self-test calibration Yes/No Save exit Print Print Factory reset Factory reset Calibrate the current light strength of sensor Cancel print Cancel caching data of printing Exit Exit menu 4.3 Main parameter setup 4.3.1 Starting up display Indicating the printer is ready for task 4.3.
BTP-P36 User’s Manual Use the “UP / DOWN” button to select the “SETUP” menu item. Print mode Set the print mode in the "Setup / Print setup / Print mode Setup" menu item. Use the “Up / Down” button to select the mode. Optional modes are “peel-off mode”, “tear-off mode”, “rewind mode”. Print darkness setup Set the print darkness in the "Setup / Print Setup / Print darkness" item. Use the "Setup" button to select the ones place and the tens place.
BTP-P36 User’s Manual Optional speed: 2 IPS~4IPS Paper type selection In the menu "Setup / Paper setup / Paper type", set the current paper type. The optional type: "label paper", "marked paper" and "punched paper". Wireless configuration In the "Setup" menu item, select "Setup / Wireless configuration", you can set the printer's network configuration. Such as a protocol type, IP address configuration, gateway configuration, and port configuration.
BTP-P36 User’s Manual In the "Configuration / Other Configuration / Language Setup" menu item, set the system language type Command set type selection In the "Configuration / Other Configuration / Command Language" menu item, set the command language type System sleep time setup In the "Configuration / Other configuration / Sleep time" menu item, set sleep status. When enabling sleep, enter the sleep delay time. Delay time is optional.
BTP-P36 User’s Manual When the paper roll is loaded in the paper cabinet, a print calibration is made. The paper and sensor calibration are made. Press the "Setup" button to enter the first level menu, and select "print calibration" to set.
BTP-P36 User’s Manual Paper end status NO print head 4.4 Buzzer function Status Explanation Music when starts up Prompt music of on and off Ring for a long time The printer has a fatal error. Ring for a short time 1. The printer has a general error or an alert 2. The button prompt sound 4.5 Peel-off function The peel-off function is used when the paper type is label paper. When using the peel-off function, you should select the "Peel-off mode" first.
BTP-P36 User’s Manual 5 Printer communication interface This printer can be connected via USB, WIFI interface and other devices. 5.1 USB interface USB interface supports USB2.0 protocol. The interface socket using MINI USB B-type standard socket: Interface signal definition: Pin Cable 1 VCC 2 DATA- 3 DADA+ 4 ID 5 GND 5.2 WIFI interface 1) Features Support 802.
BTP-P36 User’s Manual 2) Support protocols IP ARP ICMP TCP UDP DHCP TFTP HTTP - 28 -
BTP-P36 User’s Manual 6Installation printer 6.1 The host accessories This product configures with standard power adapter, belt clip, USB cable and other accessories, and optional configuration is battery charger, car charger, IP54 protective cover, shoulder strap and other accessories. When unpacking, check the packing list whether has the missing or damaged items. If any of the above phenomena occurs, please contact your dealer or manufacturers. 6.
BTP-P36 User’s Manual Remarks The printer fixed with battery.It can execute printing task when charging. Input voltage: AC100-240VAC / 50 ~ 60Hz; Charging cradleis as shown below, put the battery into the charging cradle, the plastic buckle on the battery will mate the sub-docking on charging cradle, and when you hear "pop", Indicating that the assembly is completed waiting for charging; charging method is the same as mobile phone lithium battery charging.
BTP-P36 User’s Manual When install the battery, make sure the battery is connected in place to prevent the battery from dropping. Should use the manufacturer recommended power adapter or its equivalents; When plugging the plug of power adapter, you should hold the connector cover of the plug, do not pull the cable; Avoid dragging the power adapter cable, or it will damage the cable and cause fire disaster and electric shock.
BTP-P36 User’s Manual 6.3.2 Install / replace the paper roll 1) Press the [open] button of paper top cover, open the top cover. Put the paper roll into the paper cabinet, close the top cover. When print the label paper, open the paper cabinet and open the peel-off cover. 2) The printer paper guide is continuous adjustable, and the paper guide is in the middle to adapt to the smallest 25.4mm; maximum 72mm wide roll. 3) When print the label paper, open the peel-off coveras shown in the figure below.
BTP-P36 User’s Manual The paper roll should be wrapped tightly. Otherwise, it may cause paper jam or other errors. The paper roll should be placed in the paper house smoothly, avoid tilt, otherwise it may affect the printing and paper feeding; The edge of the paper head cannot deviate from the paper out exit. 6.4 Printer connecting installation When the printer is shipped from the factory, the default connection is the belt clip.
BTP-P36 User’s Manual 2) Put the sphere parts into the groove. Then put the right belt clip cradle into the groove, refer to ① in figure above. Finally, put the belt clip③ into the groove. 3) Wrest the pan head self-tapping screwinto bottom cover using screwdriver. The pan head self-tapping screw is ST2.9×8-F-Hsupplied with the belt clip package. Remarks: When fastening screw, rotate the belt clip to one side so as not to block the screw mounting hole.
BTP-P36 User’s Manual 4) The printer begins printing the self-test page. 6.6 Connect the communication interface BTP-P36 has two communication modes: Wired communication: USB interface Wireless communication: WIFI; 6.6.1 USB interface connection 1. Insert the USB interface cable into the match interface; 2. Connect the other end of the interface cable to the host, as shown below: 6.6.2 WIFI connection WIFI connection mode: AP mode and STA mode. WIFI connection distance.
BTP-P36 User’s Manual Afterre-opening the printer, it can connect the router automatically. For WIFI connection, please refer to Appendix C for detailed operation. Caution: WIFI connection signal is the most strong when ground is open. The used equipment are different such as PDA, mobile phone, tablet and computer, the connection signal will be different; Users adjust the distance according to the specific need.
BTP-P36 User’s Manual 7 Routine maintenance Caution: Before starting routine maintenance, ensure that the battery of printer is taken out. Do not use organic solvents like gasoline or acetone. When cleaning the sensors, do not turn on the printer power until the pure alcohol has completely evaporated. It is recommended that the maintenance cycle should not be longer than one month. 7.
BTP-P36 User’s Manual 7.2 Cleaning marked sensor When any of the following cases occur, the marked sensor should be cleaned. 1) The printer alarms the paper end during printing. 2) The printer does not alarm when paper end. 3) The printer can not read the mark effectively. The cleaning steps are as follows: 1) Turn off the power. 2) Press the cover open button to open the top cover of printer.
BTP-P36 User’s Manual 1) Turn off the power. 2) Press the cover open button to open the top cover of printer. 3) Check if there is any jammed paper in the paper path. If it exists, please remove the paper folds, and cut the paper head. 4) Close the paper cover of the printer and remove the jammed paper.
BTP-P36 User’s Manual 8 Troubleshooting When the printer has any problem, refer to this chapter for solution. If the problem still cannot be solved, please contact your local dealer or manufacturer for assistance. 8.1 Printer doesn’t work Problem The printer does not work. Possible causes The battery has no power. The battery does not connect well. Circuit board is damaged. Solution Please charge the battery or replace the battery. Take out the battery and re-install it.
BTP-P36 User’s Manual 8.3 Problems during printing Possible Problem Paper continuously Solution causes feed when printing Paper cannot be sent out normally. Wrong paper type Marked sensor errors Paper jam Vertical print content is Print head missing. error Replace with matched paper roll Contact your local dealer or manufacturer. Open the top cover, check the paper feeding path and clear the jammed paper. Contact your local dealer or manufacturer.
BTP-P36 User’s Manual 9 Appendix 9.1 Printer driver installation on windows BTP-P36 provides Windows 2000 / Windows XP / Windows Server 2003 / Windows Vista / Windows Server 2008 / Server 2012/Windows 7 / Windows 8/ Windows10 operating systems drivers. 9.2 WIFI connection 1. Connect the BTP-P36 printer with windows system via WIFI.
BTP-P36 User’s Manual 2. After turning on successfully, read the right parameter of WIFI: 2. Click “on” to set communication mode, such as infrastructure mode. Other information setup: remark: The printer is regarded as terminal device connected with router when the status is infrastructure mode.
BTP-P36 User’s Manual 3. AD-Hocmode: remark: The printer is regarded as router providing other terminal inserting it when the status is AD-Hocmode: 4.
BTP-P36 User’s Manual 9.3FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
