User's Manual
Table Of Contents
- 1 Introduction
- 2 Main technical specification
- 3Appearance and components
- 4 System function and settings
- 5 Printer communication interface
- 6Installation printer
- 7 Routine maintenance
- 8 Troubleshooting
- 9 Appendix
BTP-P36 User’s Manual
- 35 -
4) The printer begins printing the self-test page.
6.6 Connect the communication interface
BTP-P36 has two communication modes:
Wired communication: USB interface
Wireless communication: WIFI;
6.6.1 USB interface connection
1. Insert the USB interface cable into the match interface;
2. Connect the other end of the interface cable to the host, as shown below:
6.6.2 WIFI connection
WIFI connection mode: AP mode and STA mode.
WIFI connection distance.
AP mode: communication distance ≤ 100 meters.
STA mode: The communication distance is limited by the router used.
WIFI mode connection
AP mode: handheld devices (such as: PDA, mobile phones, tablet, etc.)
or computer directly connected to the printer; Handheld device is
turned on again, then the handheld device can connect the printer
automatically.
STA mode: the printer, handheld devices (such as: PDA, mobile phone,
tablet, etc.) or computer are connected to the designated router;