Operation Manual

25
Compliance Information
FCC Compliance Statement: This device complies with part 15 of the FCC Rules.
Operation is subject to the condition that this device does not cause harmful
interference.
Additional testing, Part 15 Subpart B disclaimer
The module only complies with the FCC CFR 47 Parts 2, 22, 24, 27. If the module is
installed in the host device, the host manufacturer is responsible for the compliance to
any other FCC rules that apply to the host not covered by the modular transmitter grant
of certification. For example, if the host manufacturer markets their product as being
Part 15 Subpart B compliant (when it also contains unintentional-radiator digital
circuity), then the host manufacturer shall provide a notice stating that the final host
product still requires Part 15 Subpart B compliance testing with the modular
transmitter installed.
FCC Caution:
(1)Exposure to Radio Frequency Radiation. This equipment must be installed and
operated in accordance with provided instructions and the antenna(s) used for this
transmitter must be installed to provide a separation distance of at least 20 cm from all
persons and must not be collocated or operating in conjunction with any other antenna
or transmitter. End-users and installers must be provided with antenna installation
instructions and transmitter operating conditions for satisfying RF exposure
compliance.
(2) Any changes or modifications not expressly approved by the grantee of this device
could void the user's authority to operate the equipment.
(3) This Transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
(4) the modules FCC ID is not visible when installed in the host, or(5) if the host is
marketed so that end users do not have straight forward commonly used methods for
access to remove the module so that the FCC ID of the module is visible; then an
additional permanent label referring to the enclosed module: Contains Transmitter
Module FCC ID: 2AON8-BM816.