User's Manual

VDSL2 Modem User Manual
- 24 -
7. USAGE OF USB INTERFACE
The Combo DSL Gateway is a device with both Ethernet Interface and USB Interface, which is
independent, you may use either of them to connect to the different computers, in this way the two computers
can connect to the network at one time. The Gateway can be seen as a simple two-port HUB. So, do not
connect both the Ethernet Interface and USB Interface to a same computer.
When using USB Interface, you must install the drivers. After installation, a virtual network card, "USB
Remote NDIS Network Device", will be added into the computer. It has all the functions of a real network
card, and it makes installation more easily.
NOTES:
The following shows the steps for Windows®2000, the installation, configuration and uninstallation of
Windows®98 or Windows®XP are similar to this.
7.1 DRIVER INSTALLATION
1. Open the Modem, and connect the USB port. Then double click “Setup.exe” in “G:\Driver\” . You will
enter the DSL MODEM Setup Wizard as figure 7.1.1, click “Next”.
7
USAGE OF USB INTERFACE