User's Manual

VDSL2 Modem User Manual
- 6 -
② Power switch: To turn on or turn off the power.
③ Reset Key: Reset default configuration.
④ Ethernet Interface: To be connected to a PC network card by a network cable, also can use a crossover cable
to connect to Hub, Switch or Router.
⑤ Line Interface: Connected with phone line or “VDSL” port of the splitter.
1.3 LED STATUS INDICATION
Table 1.1
Status
POWER
(green)
LINK (green)
DATA (green)
USB(green)
WiFi (green)
Steady
light
Power on
The modem is
in good
connection
PPP is on
USB line is
connected
Wireless is connected
Flashing
/
No signal
/
USB port transmit or
receive data
/
Fast
flashing
/
In handshaking
status
Transmitting or
receiving data in PPP
mode
/
/
Off
Power off
Power off
PPP is Off
USB line not
connected properly
Wireless is not
connected
1.4 PROTOCOLS
VDSL Modem supports the following protocols:
1. PPPoA（PPP over ATM ） LLC encapsulation or VCMUX encapsulation (RFC2364)
2. PPPoE (PPP over Ethernet) LLC encapsulation or VCMUX encapsulation (RFC2516)
3. 1483 bridge（1483 Bridged IP over ATM）LLC encapsulation or VCMUX encapsulation (RFC1483)
4. 1483 routing（1483 Routing IP over ATM）LLC encapsulation or VCMUX encapsulation (RFC1483)
5. Classical IP over ATM (RFC1577)
1.5 FEATURES
1. Supports ANSI T1.413 ISSUE 2, ITU G.992.1(G.DMT), ITU G.992.2(G. LITE), ITU G.992.3, ITU G.992.5.
2. Web-based configuration and monitoring.
3. Supports up to 8 PVCs.
4. Routing function.
5. NAPT、DHCP function.
6. Software upgradeable.
7. ATM management function.