User's Manual

DB108-WL wireless ADSL MODEM manual
- 10 -
3. PROTOCOL CONFIGURATION
Different protocols should be set in “WAN”,“LAN”,“NAT”and “DNS” columns in the configuration page.
Click on the relevant icons to enter the right page accordingly. The detail is listed below.
3.1 RFC1483 BRIDGE CONFIGURATION
1. WAN SETTINGS
z Set “Enabled” as “Yes ”
z Set value of VPI, VCI (For example VPI=0,VCI=32)
z Select “1483 Bridged IP LLC” or “1483 Bridged IP VCMUX” in “encapsulation ” (some data need to be
provided by DSL service provider);
z Select “Enabled” in “BRIDGE ” item
z Click “Submit” on the bottom of the page to save the parameters.
z The result is as figure 3.1.
Figure 3.1
2 LAN SETTINGS
Keep the default configuration.
3 NAT SETTINGS
Set “NAT ” item as “Dynamic NAPT” or “Disabled”as in Figure 3.2, click “Submit” to save the
configuration.