User's Manual

DB108-WL wireless ADSL MODEM manual
- 14 -
z For PPPoEselect “PPPoE LLC” or“PPPoE VCMUX” in “ENCAPSULATION ” (some values need to
be provided by DSL provider ) ;
z For PPPoAselect “PPPoA LLC” or“PPPoA VCMUX” in “ENCAPSULATION” (some value need to
be provided by DSL provider )
z Select “Disabled” in “BRIDGE” item
z At PPP “User Name” and “Password”, input appropriate User Name and Password. (some value need to be
provided by DSL provider, here we use “ADSL” for example )
z Results as Figure 3.6.
Note
z The selection of “Automatic Reconnect“will make the ADSL MODEM to dial-up automatically when
the CO disconnects the dial-up
z “Disconnect Timeout“can be set at your preference. The value ”0“ means never disconnect.
z Authentication can be set either“PAP“or ”CHAP“. Consult with DSL provider for detail.
Figure 3.6
2 LAN SETTINGS
Keep the default configuration.
3 NAT SETTINGS
Set “NAT” as “Dynamic NAPT” or “NAPT” as Figure 3.4 ,then click “Submit” to save the settings
4 DNS SETTINGS
Set DNS Proxy selection at“Use Auto Discovered DNS servers only”then click “Submit” to save the settings.