User's Manual

DB108-WL wireless ADSL MODEM manual
- 3 -
Data Indicator (green): Flash means the Modem is transmitting or receiving data.
Power Interface 11VDC700mA.
Ethernet InterfaceUsing CAT 5 twisted parallel cable to connect with PC or HUB. When connecting with PC
network card, use direct network cable; connect with UP LINK interface of HUB by the
crossover network cable.
Usb InterfaceFor Modem connection on program upgrade or alternative internet access.
Line InterfaceConnect to telephone.
Reset button: Reset the configuration to default
1.3 PROTOCOLS
DB108-WL ADSL Modem supports ADSL protocols below:
1. PPPoAPPP over ATM  LLC encapsulation or VCMUX encapsulation (RFC2364)
2. PPPoE (PPP over Ethernet) LLC encapsulation or VCMUX encapsulation (RFC2516)
3. 1483 bridge1483 Bridged IP over ATMLLC encapsulation or VCMUX encapsulation (RFC1483)
4. 1483 routing1483 Routing IP over ATMLLC encapsulation or VCMUX encapsulation (RFC1483)
5. Classical IP over ATM (RFC1577)
1.4 FEATURES
1. Supports ANSI T1.413 ISSUE 2 ITU G.992.1 (G.DMT)ITU G.992.2 (G.LITE).
2. Supports data transportation among ADSL, Ethernet and WLAN
3. Web-based configuration and monitoring.
4. Supports up to 8 PVCs.
5. Routing function.
6. NAPTDHCP function.
7. Maximum upstream transmission rates of 1Mbps
8. Maximum downstream transmission rates of 8 Mbps
9. Software upgradeable.
10. ADSL transmission distance up to 5 km.
11. Wireless access distance more than 100m
12. ATM management function.