Installation Instructions

 %DVLF 2SHUDWLRQV (/3
 8VLQJ D 3UHVHW 7DUH :HLJKW
37
8.3.3 Using a Preset Tar e w eight
Using a Preset Tare weight is accomplished by pre-programming the Tare
weight for the PLU during the PLU programming steps (refer to S Mode - S1
PLU File). When the PLU is recalled, the Preset Tare weight is recalled with the
PLU.
Ex.) Recall PLU #18 which has a Preset Tare weight of 0.10 lbs.
8.3.4 Clearing Tar e Weights
All types of Tare weight will normally be cleared automatically upon completion
of a transaction. The only time this will not happen is if the Save key has been
depressed before the transaction or the scale is in the Prepack Mode of
operation.
Note: The completion of a transaction is defined as the weighing of the
commodity, the issuing of the label and the removal of the commodity from
the platter and the label from the printer.
To manually clear a Tare weight before a transaction, simply remove the
container (tare weight) and press the Tare key.