Quick Start Guide
Figure 2 Figure 3
Push the SIM card metal contacts all the way down into the slot, paying
attention to the chamfering direction. Figure 2
Push the metal contacts of the Micro SD memory card down into the slot,
paying attention to the chamfering direction.Figure 3
Align the copper part of the battery with the copper contact end of the
battery compartment and gently insert the battery.
After the battery is installed, install the battery compartment cover and push
the rear cover to the locked position to lock the battery compartment cover.
4ăSwitching machine
To power on, firmly press the [Power Button] on the bottom right side until the
boot screen appears. Screenshots and other options, select the shutdown option,
then shut down.
In the power on state, click [Power button] to close the screen and enter the sleep
mode; click [Power button] again to wake up the screen, and slide the screen up
on the screen to unlock the screen; the host will automatically turn off the screen
and enter the sleep mode after a period of inactivity.